How To Repair Cove Ceiling

If your home has original coving – whether Victorian, Edwardian or Georgian – or more contemporary ceiling cornicing, then chances are it'll demand some TLC equally office of your house renovation. Layers of paint that build upwardly over years can obscure the detail of the coving and need stripping back so that you lot can get a smooth, fifty-fifty stop.

Cracks can also announced in the coving that need conscientious filling before you utilize another coat of pigment. We've teamed upward with builder Sian Astley to produce a footstep-by-footstep video guide to restoring your cornicing.

In one case your coving is restored, check out our guides to painting a room and painting a ceiling.

Essential kit

Before y'all kickoff, brand certain you accept the right tools. You lot'll need:

• A pigment stripping production similar Peelaway, if required
• Ladder or platform to safely stand on
• Clean water
• Calorie-free disinfectant
• Cloths
• Non-annoying sponges
• Soft filler
• Chisel
• Make clean brush
• Sandpaper
• Paint, if using

Related articles: How to gear up and pigment a wall | How to cut in when painting a wall or ceiling | How to paint a door

1. Strip off layers of paint

If your coving is covered in thick layers of paint, utilise a product like Peelaway to go information technology strip information technology dorsum to the plaster then you can pigment from scratch. A paste is applied to the coving using a spatula, brush or trowel and the surface is then covered with a poultice blanket for the required corporeality of fourth dimension. When stripping is complete, the coating, paste and paint are removed with the stripped paint sticking to the blanket to forestall any harmful particles condign airborne.

2. Sand and clean

If you don't have layers of paint to strip off, then offset past giving the coving a sand and a good clean. Utilize sheets of sandpaper that you lot can shape into the nooks and crannies, so apply a mild detergent spray and then wipe off with clean water.

3. Refine the edges

To make the nearly of the decorative cornice, restoring defined, crisp edges is key. Using a small-scale chisel or bract, carefully skim forth the edge or the front end-facing groove first to highlight the corners and right angles, chipping abroad whatever excess paint to get a polish finish. Practise the same along the other lines of your cornice, working down to the bottom, but being careful not to chop away also much and compromise the original shape.

iv. Repair whatsoever cracks

Original cornice may have go damaged over the years, or y'all may find cracks that have been covered with paint once you've stripped it dorsum.

Outset, use a small chisel to advisedly chip away the edges of the crevice, resulting in a more fifty-fifty surface, and then sand away whatsoever lumps so that the expanse is smooth.

Using a spatula or wide chisel, apply a pre-prepared soft filler to the expanse, filling the crack and smoothing over, so that when pigment is applied, the finish is seamless. Make sure to not overload the filler – it's best to employ a little bit at a time and height upwards with more if required.

5. Make clean the cornice again

Later on refining the edges and applying filler (and waiting for this to dry), clean the cornice with a cloth and clean water to remove grit. End by spraying on sugar soap and wiping away residue earlier you begin painting.

6. Apply your paint

You lot may like to exit your cornice stripped for a distressed look, just if you're planning to paint it, utilize a bones matt emulsion. Use the showtime coat, get out to dry and and then paint over with a second coat. If you stripped the coving right back to the plaster, then you'll need to employ a primer before yous brainstorm applying your emulsion.

Bank check out these related articles

• Learn how to paint a room, walls and all, with our handy guide
• Find out how to cut in when painting walls and ceilings

Source: https://www.realhomes.com/advice/how-to-repair-and-restore-cornice

Posted by: sparksvaint1949.blogspot.com

Share this post